The new Eubanks Model 6380 Benchtop Prefeed is
a heavy-duty machine that offers the advantages of a reel-driven
wire delivery system. It provides the wire processor with slack
wire on demand assuring optimum wire length accuracy and reducing
stress on the processor's drive mechanism.
A heavy-duty, one-half horsepower motor lets it deliver fast
ramp-up and ramp-down speeds with instant response. This means
no lag in starting and no over-run when the wire stripper stops.
At reel rotation speeds of up to 600 rpm, it is fast enough to
keep up with any wire processor. When the prefeed is used with
Eubanks AutoStrip machines, the wire stripper will shut down in
the event of a jam or tangle at the prefeed and the prefeed will
stop when the wire stripper stops.
This new benchtop unit offers two modes of operation. In the
demand mode, the speed increases or decreases in response to wire
processor demand. An adjustable continuous feed mode is used for
fragile wire, e.g. 28 AWG. It also has a manual jog switch for
easy wire loading and unloading.
in. (465 mm)
Width: 30.25 in. (770 mm)
Depth: 24 in. (610 mm)
Weight (less wire reel): 60 lbs.
|Shipping Weight: 85 lbs.
Motor: 1/2 hp
Maximum Drive Speed: 600 rpm
Clear hinged polycarbonate cover with safety interlock.
Includes two reel adapters for mounting all standard reels.
Wire Reel Specifications
15 in. (380 mm)
Max Width: 10 in. (250 mm)
|Maximum Weight: 75 lbs.
Min Center Hole Diameter: .75
in. (19 mm)
Model 6380-01: 115 VAC +/- 5%, 60 Fl:+/-2 Hz, 10 A
Model 6380-02: 230 VAC +/- 5%, 50 H:+/-2 Hz 6 A